Reduced price! ACCENTRA (formerly Yale) 7250M Electrified Narrow Design Rim Squarebolt Exit Device

View larger

ACCENTRA (formerly Yale) 7250M Electrified Narrow Design Rim Squarebolt Exit Device

Model:

Write a review

Item normally ships out within 4-6 Weeks (excluding transit time). Specific options may or may not increase shipping time. For any reason, if there is a delay in shipping time we will notify you. Feel free to contact us if you have any concerns.

Details: ACCENTRA (formerly Yale) 7250M Electrified Narrow Design Rim Squarebolt Exit Device

Alarm Kit 'A'

Activation: Alarm is armed by turning key clockwise. Low audible chirp indicates alarm has been activated. Alarm will sound when the exit device pushpad is depressed. Factory preset for standard alarm mode which automatically resets after 5 minutes.
Continuous Alarm Mode: Alarm sounds continuous when the exit device pushpad is depressed. Alarm must be manually reset by keyswitch. (This feature is selected by a switch on the circuit board.)
Low Battery Warning: Audible chirp.
Nuisance Alarm: Factory preset for instant alarm. Selectable feature for alarm to sound when pushpad is depressed for more than 2 seconds. (This feature is selected by a switch on the circuit board.)
Arming Delay/Authorized Egress: 10-second delay (after arming) permitting egress (by turning key clockwise).
Alarm Shunt: Ingress shunt alarm input for devices with latchbolt position (S) monitor. NOTE: "S" included with SVR devices.
Power Requirements: One 9-volt battery (included).
Loudness: 90db @ 10 feet.
Arm/Disarm: Uses one 1-1/8" straight cam mortise cylinder. Clockwise turn arms the alarm, counter clockwise turn disarms or silences the alarm.
Device Status: A Red LED indicator will illuminate every 30 seconds when the alarm is armed.
Tamper Resistant: Built-in safety monitor sounds alarm when tampering occurs.
Warning Decal: "EMERGENCY EXIT - ALARM WILL SOUND"
Standard 36" device fits doors 35"-36" Device cannot be cut less than 35".
Option -48 fits doors 41"— 48". Devices cannot be cut less than 41".

Touchbar Monitor 'B'

Provides indication of the pushpad being depressed. Used as a Request to Exit switch to shunt alarm systems, release electromagnetic locks or monitor egress.
Electrical Specifications: 2A @ 28VDC, SPDT contacts
Listings: UL/cUL listed for panic and fire exit hardware.
Not available on "D" Delayed Egress devices or with the "A" Alarm kit option.

Delayed Egress 'D'

An exit door is normally closed and latched. The delayed egress device secures the door in the locked mode with the Red LED indicating locked mode status. Depressing the pushpad for less than three seconds will cause the device to beep without initiating the alarm. Depressing the pushpad for three seconds or longer will initiate an irreversible local audible beeping tone and a visual amber indicator. The person depressing the pushpad is denied egress for 15 or 30 seconds while alarm signals unauthorized egress. After the factory-set delay time (15 or 30 seconds), the device releases for egress, the LED changes to Green and the beep changes to a steady tone which continues to alarm until reset. The remote monitoring contact outputs can be used to alert security personnel.

For use on hollow metal interior or exterior doors.
Available for 7100(F), 7200M(F) and 7200 series rim, SquareBolt , surface vertical rod, concealed vertical rod and mortise panic and fire-rated exit devices. For surface vertical rod exit devices, rod and latch guards (provided by other) must be used.
Complies with NFPA 101 "Code For Safety To Life From Buildings And Structures" by National Fire Protection Association.
1-3/4" door thickness standard
Standard 36" device fits doors 35"- 36" Device cannot be cut less than 35".
Option -48 fits doors 41"- 48". Devices cannot be cut less than 41".
Input Voltage 24VDC (+/- 10%)
Standard Device: 500 mA
Device with Safe/Secure Electric Mortise or Electric Trim Control: 1.5 Amps.
UL/cUL Listed: FUKD/FUKD7 - Controlled Exit Panic Devices
FWAX/FWAX7 - Special Locking Arrangements
GXHX/GXHX7 - Fire Exit Hardware
ANSI/BHMA Certified: A156.3 & A156.24

Latchbolt Position Monitor 'S'

Provides indication on the position of the latchbolt. Used with security systems to monitor the latchbolt, also used to activate automatic door operators upon latch retractions.
Electrical Specifications: 2A @ 28VDC
Listings: UL/cUL listed for panic and fire exit hardware.

Motorized Electric Latch Retraction 'MELR'

Allows the latchbolt to be retracted electrically for momentary or maintained periods of time from a remote location. The exit device bolt remains retracted for as long as the device is energized. Removal of power returns the device to the life safety, self-latching mechanical mode. Easy interface with central or local fire alarm systems, automatic door operators, hands-free actuation devices, and access control systems. Allows free egress at all times. Manual hex key dogging standard on non-rated devices. Not available on openings less than 30" wide.

Electrical Specifications : 24VDC (BPS-24-1) regulated/filtered power supply. Requires 1A per device. 0.65A amp max during retraction. 0.2 amp holding-continuous duty
Listings - UL/cUL listed for panic and fire exit hardware. Fire-rated devices must be wired into an automatic fire alarm system.
Not available on "A" alarm exit device and "D" delayed egress exit devices.

Applications

Public Buildings & Facilities
Commercial & Industrial Buildings
Government & Military Facilities
Retail & Strip Malls
Multifamily & Mixed-Use

Downloads

ACCENTRA Commercial Warranty